Lifting Machinery 20 Ton Double Girder Bridge Overhead Crane with dwg
1. Products Introduction
LH double-girder crane with electric hoist consists box-shaped bridge, trolley traveling mechanism, crab and electric equipment. It employs fixed electric hoist which is fitted on crab frame as hoisting mechanism. The crab uses LD drive to run,while the trolley adopts LD drive or drive. The structure, simple and convenient, features low entire height anti light dead weight, so that it is applicable to operational sites of medium and small lifting load such as factories and mines, workshops and warehouses.
It has three operation modes : ground handle, wireless remote control and cab.
The cab has two types : open cab and closed cab.
Application Scope:
This equipment is widely used in hoisting operation, for instance, factory, mines, transport materials in the fix span scope, mechanical processing workshop, metallurgical factory and subsidiary workshop, warehouse, material yard and power plant.
Safe Features:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounters some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
4. Main lifting motor: With thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Crane switch and travel end switch
8. All cranes must be preassmebled and tested before leaving factory and offer the certification of test
Painting:
Painting will be completed in the factory before shipping.
After manufacturing (after welding)
Average thickness: About 100 microns
Electrical elements
The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.
Overload protection: In the event of overload, the hoist unit switches off and only the lowering motion is possible.
Control method: Pendent wire. Cabin control. Remote control
2. Technical Specification
3. FAQ
Thank you for you patient reading. If you still have some questions about our products, our corporation or others, the following may help you.
1) What's the information should I provide when inquiry?
A: Lift capacity B: span C: lift height D: power source
The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
2) How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons.B: remote control with push buttons
C: cabin(space capsule seat) control with joystick.Choose any type as you like.
3) Can this type work in hazardous environment?
That's Sure! This type product is just for application in general manufacturing workshop.For hazardous environment, please consult our professional sales manager.
We can customize for you, acid proof or explosion proof, no problem for that.
4) Can you provide the serious lifting tools?
That's sure! we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
5) How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
4. Contact Us
1. Products Introduction
LH double-girder crane with electric hoist consists box-shaped bridge, trolley traveling mechanism, crab and electric equipment. It employs fixed electric hoist which is fitted on crab frame as hoisting mechanism. The crab uses LD drive to run,while the trolley adopts LD drive or drive. The structure, simple and convenient, features low entire height anti light dead weight, so that it is applicable to operational sites of medium and small lifting load such as factories and mines, workshops and warehouses.
It has three operation modes : ground handle, wireless remote control and cab.
The cab has two types : open cab and closed cab.
Application Scope:
This equipment is widely used in hoisting operation, for instance, factory, mines, transport materials in the fix span scope, mechanical processing workshop, metallurgical factory and subsidiary workshop, warehouse, material yard and power plant.
Safe Features:
1. Overload protection: If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. Emergency brake: If the operation staff encounters some emergency situation, we could start the emergency brake system to protection the related treasure.
3. Control Method: Room control or remote control to avoid any injure to the operation staff.
4. Main lifting motor: With thermal protection and currency protection.
5. Hooks with latch
6. Rubber buffers
7. Crane switch and travel end switch
8. All cranes must be preassmebled and tested before leaving factory and offer the certification of test
Painting:
Painting will be completed in the factory before shipping.
After manufacturing (after welding)
Average thickness: About 100 microns
Electrical elements
The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.
Overload protection: In the event of overload, the hoist unit switches off and only the lowering motion is possible.
Control method: Pendent wire. Cabin control. Remote control
2. Technical Specification
Lifting Capacity | t | 5 | 10 | 16 | 20 | ||
Max.Lifting Height | m | 20 | 18 | 22 | 26 | ||
Span | m | 10.5-31.5 | |||||
Working System | A6 | ||||||
Speed | Trolley | Hoisting | m/min | 40.1 | 40.7 | 41.8 | 48.6 |
Traveling | 44.6 | 45.7 | 43.2 | 43.2 | |||
Bridge traveling | 93.7-114.4 | 112.5-101 | 98-87.3 | 87.3 | |||
Weight | Trolley | 5.2/5.9 | 8.2/9.1 | 14.8/15.9 | 19.3/20.4 | ||
Total | Indoor | 19.9-41.3 | 26.5-50.4 | 47.3-67.9 | 56.1-75.6 | ||
Outdoor | 20.7-42.1 | 27.4-51.2 | 48.5-69 | 57.3-76.8 | |||
Grab | Volume | m 3 | 2.5-0.75 | 5-1.5 | 8-2.5 | 10--3 | |
Dead weight | kg | 2632-2546 | 4800-4793 | 7841-8305 | 9812-10123 | ||
Rail recommended | 43kg/m, QU70 | ||||||
Power Source | 3Phase AC 380V 50HZ (As your demand) |
3. FAQ
Thank you for you patient reading. If you still have some questions about our products, our corporation or others, the following may help you.
1) What's the information should I provide when inquiry?
A: Lift capacity B: span C: lift height D: power source
The more information you provide, the accurate solution we can prepare for you! The information such as the lift capacity, span, lift height, power source or other specials you give us will be more appreciated.
2) How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons.B: remote control with push buttons
C: cabin(space capsule seat) control with joystick.Choose any type as you like.
3) Can this type work in hazardous environment?
That's Sure! This type product is just for application in general manufacturing workshop.For hazardous environment, please consult our professional sales manager.
We can customize for you, acid proof or explosion proof, no problem for that.
4) Can you provide the serious lifting tools?
That's sure! we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
5) How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
4. Contact Us
Company: | Henan Hercules Crane Machinery Co., Ltd. |
Contacter: | Cathy Chu |
Mob: | 86-15093082161 |
Tel: | 86-0371-55659885 |
Fax: | 86-0371-55656165 |
Address: | Room 20D, Building No.8, CBD Inner Ring Road, Zhengdong District, Zhengzhou, Henan, China |